Sewing Organizer Tutorial ~

Purse Organizer Sewing Pattern. Photo Sewing Tutorial. Step by step.
How to sew organizer for storing various accessories for needlework. It is suitable for storing tapes, buttons and laces. In internal of the vertical pockets can store scissors, needles, crochet hooks, and more, so you need needle women.

Materials and tools:
- Wool felt thickness of 3 mm or greatcoat cloth;
- 1 mm thick felt;
- Zipper 50-60 cm;
- Thread;
- Scissors.

Dimensions organizer: height - 18 cm, base diameter - 15 cm.
Pattern consists of two circles with a diameter of 15 cm (bottom and lid) and two side walls of the outer - height of 18 cm and an internal - 13 cm. The length of the side walls is defined by the formula below.

In parts of the outer sidewall markings do for zippers. To do this, having receded from the upper edge 2.5 cm, and from the sides of 2 cm, draw the rectangle width 0.5 -0.7 cm and cut it to the planned lines.

I have a zipper with two sliders. Make this the most is not difficult. To do this, ordinary lightning cut off the top and insert limiters second slider, the right size.

Sew on the zipper on the perimeter of the rectangle, cut the thread and zippers surplus.

Sew on a hidden seam free edge textile zipper tape.

On the front side of the inlay is placed at will. Decor cut out of felt thickness of 1 mm. Pins outline the points where the line will take vertical stitching of internal pockets to avoid getting decor under the seam.

After inlay sew, we see an inner sidewall. Draw a line for future vertical pockets. In addition, these pockets will help us in keeping sharp objects and add about our organizer, they have another function - they will give additional rigidity organizer and hide inside out decor.

Details of the walls are connected, the bottom line is also laid at a distance of 1 cm from the edge.

Here's how it looks from the inside. Under the hidden pockets of sewing thread all the decor and the lower edge of the zipper.

Sew the bottom and lid of our organizer.

Cut out of cloth or felt 4 circles 15 cm in diameter. One of orange circles in the color of our lightning. We put him on the cover of our future organizer. From cardboard cut out two circles with a diameter of 13 cm. They will add to the strength of our items. And two strips 2.5 cm wide and 15 cm long. This is the future of our handle organizer.

Sew the bottom. To do this, we collect here is a "sandwich" and sew around the perimeter.

Sew the handle for our organizer.

Getting to the final assembly. We bend our organizer in the ring. Connect the short cuts and butt stitch on stitch on the sewing machine "zigzag".

Close the zipper open sections of a piece of cloth and felt, his hiding When sewing a seam, or using glue. And here is the visible pockets of our future

Connect the bottom and lid to the side walls. Sewing by hand thread in tone seam "over the edge".
Our organizer is ready, but will spend a few more minutes for the manufacture of useful little things :)

In addition to our organizer, we will do another pincushion. Take the empty spool. Measure the diameter is calculated by a known formula length side panel.